brake fluid

 hello everyone.i want to tell you about "to choose a brake fluid in this time.

             It may be in the market are so many choices of brake fluid . But about how to choose the correct brake fluid ? It turns out that the easiest way is to choose the brake fluid which has a high boiling point .There is the most effective way to choose the best brake fluid for the vehicle . Ie selecting the brake fluid which has a very high boiling point , does not rust , and does not damage the brake fluid boiling point karet.Untuk minimum of 245 degrees Celsius . 

            While the standard is only 205 degrees Celsius for DOT 3 ( standardization in the United States or the Department of Transfortation ) .As for replacing the brake fluid there own rules .Many vehicle users in Indonesia, one of the current automobile brake fluid replacement . Where many riders in just doing brake fluid replacement at any time and the wrong master .

           Should be when doing replacement or recharging is done by draining , not replace at the moment saja.adi master replacement or recharging it should be drained . Because the wires are still there in the old brake fluid . So the new brake fluid filled can not be used to its full potential .So that when the fluid is not functioning properly , it could cause brake fluid kecelakaan.Dan if not functioning properly , it can cause brake failure and the cause of the accident . In addition the brake fluid can also be depleted if the rubber seal is damaged.

 thanks for reading .hopefully it can guide you,see you.